ibluechip

Surface Mounting Technology (SMTU)

리튬 코인 셀을 위한 레나타의 배터리 홀더의 포괄적인 라인은 Through-hole 또는 SMT 디자인의 Horizontal 또는 vertical 버전으로 제공됩니다. 소형 배터리의 선도적인 생산자이자 공급자인 Renata는 최고 품질의 요구사항에 맞춰 홀더 프로그램을 개발했습니다. 낮은 접촉 저항, 코인 셀의 안전한 유지, 최첨단 납땜성 등이 있습니다. SMT 배터리 홀더는 테이프 및 릴 포장으로도 제공됩니다.

Surface Mounting Technology (SMTU)

Features

Easy and fast replacement of the battery
Designed for automatic "pick & place" mounting
Safe retention of coin cell
Automated battery mounting possible
Clear separation of connections
Protection against short circuits
Protection against inverse polarity (polarized)
Protection against leak currents
Robust design
Suitable for reflow soldering

* Gold plated contacts for increased conductivity

Specifications

Holder material: heat-resistant, glass fibre filled LCP
Flammability rating UL 94 V-O
Battery contacts: spring stainless steel AISI 301, nickel-plated throughout. Solder area tin-plated throughout, min. thickness 5μm.
Contact resistance between contacts and the cell is less than 100 mΩ (measured through AC 1kHz; depending on the case material of the cell).
UL recognition, file E218732
Operating temperature range: - 40/+100°C

Renata part name	For use with Renata cell	Weight (g)	Maximum dimensions (mm)						Technical information
			A	B	C	D	E	F
SMTU357-LF	357	0.85	23.6	19.9	11.6	12.0	7.55	20.7	PDF
SMTU1220-LF	CR1220	0.80	23.7	20.3	12.5	12.7	4.8	21.1	PDF
SMTU1225-LF	CR1225	0.70	23.7	20.3	12.5	12.7	4.8	21.1	PDF
SMTU1632-LF	CR1632	0.80	27.7	24.3	16.0	14.5	5.4	25.1	PDF
SMTU2032-LF	CR2032	0.95	32.0	28.5	20.0	16.1	5.4	29.4	PDF
SMTU2430-LF	CR2430	1.05	36.4	33.0	24.5	16.1	4.9	33.8	PDF
SMTU2450N-LF	CR2450N	1.45	36.4	33.0	24.5	16.1	7.5	33.8	PDF
SMTU2477N-LF	CR2477N	1.65	36.4	33.0	24.5	16.1	10.3	33.8	PDF
SM2X2016-LF	CR2016	0.95	32.0	28.5	20.0	16.1	5.4	29.4	PDF
SMTU2032-G*	CR2032	0.95	32.0	28.5	20.0	16.1	5.4	29.4	PDF

Surface Mounting Metal (SMTM) - Low profile

Surface Mounting Metal (SMTM) - low profile

Features / Specifications

Low profile for compact PCBs
Light weight metal material
Dual spring contacts for low resistance
Soldering holes for increased joint strength
Designed for automatic "pick & place" mounting
Safe retention of coin cell
Suitable for reflow soldering
Operating temperature range: - 40/+100°C
Holder material: Nickel platted phosphor bronze

Renata part name	For use with Renata cell	Weight (g)	Maximum dimensions (mm)										Technical drawing
			A	B	C	D	E	F	G	H	I	J
SMTM1225	CR1225	0.40	18.9	13.2	12.5	10.6	3.2	3.2	3.2	1.2	16.1	1.5	PDF
SMTM1632	CR1632	0.70	23.2	16.9	16.0	13.25	4.0	3.2	3.0	1.2	20.05	1.0	PDF
SMTM2032	CR2032	0.90	30.7	21.0	20.0	16.0	4.0	5.1	4.7	2.4	26.0	1.0	PDF

Surface Mounting Clip (SMTU-C)

Features

Safety clip provides superior retention of coin cell
Easy and fast replacement of the battery
Designed for automatic "pick & place" mounting
Clear separation of connections
Protection against short circuits
Protection against inverse polarity (polarized)
Protection against leak currents
Robust design
Suitable for reflow soldering

Specifications

Holder material: heat-resistant, glass fibre filled LCP
Flammability rating UL 94 V-O
Battery contacts: spring stainless steel AISI 301, nickel-plated throughout. Solder area tin-plated throughout, min. thickness 5μm.
Contact resistance between contacts and the cell is less than 100 mΩ (measured through AC 1kHz; depending on the case material of the cell).
Operating temperature range: -40/+100°C

Renata part name	For use with Renata cell	Weight (g)	Maximum dimensions (mm)						Technical drawing
			A	B	C	D	E	F
SMTU1632-C	CR1632	0.80	27.7	24.3	16.0	14.5	5.4	25.1	PDF
SMTU2032-C	CR2032	0.95	32.0	28.5	20.0	16.1	5.4	29.4	PDF
SMTU2430-C	CR2430	1.05	36.4	33.0	24.5	16.1	4.9	33.8	PDF

Through-hole Mounting (HU) - Horizontal

Through-hole mounting (HU) - horizontal

Features

Easy and fast replacement of battery
Designed for automatic "pick and place" mounting
Safe retention of coin cell
Automated battery mounting possible
Clear separation of connections
Safety against short circuits
Safety against inverse polarity (polarized)
Protection against leak currents
Robust design
Suitable for wave-soldering

Specifications

Holder material: heat resistant, glass fiber filled LCP.
Flammability rating UL 94 V-0
Battery contacts: spring stainless steel AISI 301, nickel plated throughout. Solder area tin-plated throughout, min. thickness 5µm.
Contact resistance between contacts to the cell is less than 100mΩ (measured through AC 1kHz; depending on the case material of the cell).
UL recognition, file E218732
Operating temperature range: -40/+100ºC

Renata part name	For use with Renata cell	Weight (g)	Maximum dimensions (mm)					Technical drawing
			B	C	D	E	F
HU357-LF	357	0.84	19.9	11.6	12.0	7.4	18.65	PDF
HU1225-LF	CR1225	0.70	20.3	12.5	12.7	4.6	19.1	PDF
HU1632-LF	CR1632	0.80	24.3	16.0	14.5	5.2	23.0	PDF
HU2032-LF	CR2032	0.95	28.5	20.0	16.1	5.2	27.2	PDF
HU2430-LF	CR2430	1.05	33.0	24.5	16.1	4.7	31.7	PDF
HU2450N-LF	CR2450N	1.45	33.0	24.5	16.1	7.3	31.75	PDF
HU2477N-LF	CR2477N	1.65	33.0	24.5	16.1	10.1	31.8	PDF

Through-hole Mounting (VBH) - Vertical

Through-hole mounting (VBH) - vertical

Features

Small PCB foot print
Easy and fast replacement of the battery
Safe retention of coin cell
Protection against short-circuits
Protection against inverse polarity (polarized)
Protection against leak currents
Robust design
Suitable for wave and reflow soldering

Specifications

Holder material: high performance polyamide
Flammability rating 94V-0
Battery contacts: spring stainless steel AISI 301, nickel-plated throughout.
Temperature range: -40/+85°C

Renata part name	For use with Renata cell	Weight (g)	Technical drawing
VBH2032-1	CR2032	1.86	PDF

Through-hole Mounting with Positioning Pins (NH/NL)

Through-hole mounting with positioning pins (NH/NL)

Features

Easy and fast replacement of used-up batteries
Snap-on fixing for coin cells
Safe retention of coin cell
Clear separation of connections
Protection against short-circuits
Protection against inverse polarity
Protection against leak currents
Robust design
Easy and safe PCB mounting due to additional positioning pins
Suitable for wave-soldering

Specifications

Holder material: polyamide 66.
Flammability rating UL 94 V-2
Battery contacts: Nickel 99.6 DIN 17740
Contact resistance between contacts and the cell is less than 100 mΩ(measured through AC 1kHz)
Solder and positioning pins tin plated through-out, min. thickness 5 µm.
UL recognition, file E218732
Operating temperature range: -40/+85°C

NH5077-LF - Vertical version

NL5077-LF - Horizontal version

Renata part name	For use with Renata cell	Weight (g)	Technical drawing
NH5077-LF	CR2450N, CR2477N	2.4	PDF
NL5077-LF	CR2450N, CR2477N	2.9	PDF

ibluechip

팝업레이어 알림

Battery Holders

Surface Mounting Technology (SMTU)

Surface Mounting Metal (SMTM) - Low profile

Surface Mounting Clip (SMTU-C)

Through-hole Mounting (HU) - Horizontal

Through-hole Mounting (VBH) - Vertical

Through-hole Mounting with Positioning Pins (NH/NL)

Bluechip 제품소개

Contact US

Customer Center

02-2113-2790

(주)블루칩이엔피